vvdi prog programmer

Buy VVDI-Prog programmer, get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service.



Xhorse VVDI Programmer Information Contents:

VVDI Prog Latest Update Log
How to Perform Online Update for VVDI Prog?
VVDI Prog Programmer Supported Type List
VVDI Prog Accessories Adapter Connection Diagram
VVDI Prog Programmer Feedback
VVDI Prog Reviews
VVDI Prog FAQs
VVDI Prog Programmer Package List

VVDI Prog Latest Update Information:

V5.1.0 VVDI Prog Update (2021-12-31)
VVDI Prog 5.1.0 Sofware Free Download Password:123456
* This version DON't need update firmware
* Fix M95010, M95020, M95040,options in <1-EEPROM&FLASH>->
* Modify LOCK_BCM2-1(ADAPTER),LOCK_BCM2-1(WELD),LOCK_BCM2-2(ADAPTER), LOCK_BCM2-2(WELD), options in <4-IMMOBILIZER>->: Optimize the process
* The default voltage of options about MC68HC(9)08 change to 10.5V
+ Add CAT93C86 option in <1-EEPROM&FLASH>->
+ Add PCA8581, PCD8582, PCF85116, PCF8582, PCF8598 options in<1-EEPROM&FLASH>->
+ Add S-93C46BD, S-93C46BR, S-93C46C, S-93C56BD, S-93C56BR, S-93C56C, S-93C66BD, S-93C66BR, S-93C66C,S-93C76BD,S-93C76C, S-93C86BD, S-93C86C options in<1-EEPROM&FLASH>->
+ Add TC97101 option in <1-EEPROM&FLASH>->
+ add MB91F249/S, MB91F264, MB91F272, MB91F312, MB91F346, MB91F463NA, MB91F463NC, MB91F464A, MB91F465B, MB91F465D, MB91F465K, MB91F465P, MB91F465X, MB91F467B, MB91F527, MB91F528, MB91F552, MB91F583, MB91F584, MB91F585AM/AS, MB91F585L, MB91F586L, MB91F587L, MB91F625, MB91F635A, MB91F637, MB91F637A, MB91F639, MB91F639A, MB91F644, MB91F644A, MB91F647, MB91F647A, MB91FV310:FONT, MB91FV310:PROG, MB91FV319A:FONT, MB91FV319A:PROG, MB91FV319R:FONT, MB91FV319R:PROG, options in <2-MCU>->

V5.0.9 VVDI Prog Update (2021-12-1)
* This version DON't need update firmware
* Modify LOCK_BCM2-1(ADAPTER), LOCK_BCM2-1(WELD), LOCK_BCM2-2(ADAPTER), LOCK_BCM2-2(WELD),options in<4-IMMOBILIZER>->:
* Modify DASHBORAD(2013--)(SPC5604S), DASHBORAD(2013--)(SPC5606S), options in <5-DASHBORAD>-> VCC default voltage changed to 3.7V
+ ADD MA82G5A64, MA82G5B16, MA82G5B32, MA82G5C32, MA82G5C64, MA82G5D16, MG82F6D16, MG82F6D17, MG82F6D32, MG82F6D64, MG82G5E32, options in <2-MCU>->
+ Add R5F21386, R5F21387, R5F21388, R5F2138A, R5F2138C, options in <2-MCU>->
+ Add R7F701202, R7F701204, R7F701215, R7F701216, R7F701270, R7F701271, R7F701275, R7F701278, options in <2-MCU>->
+ Add D70F3441, D70F3447, D70F3483, options in <2-MCU>->
+ Add J518(2010)(0L01Y)(ADAPTER), J518(1L59W/3L40K)(ADAPTER) options in <4-IMMOBILIZER>->
+ Add CAS3+-0L15Y(ADAPTER), CAS3+-0M23S(ADAPTER), CAS3-0L01Y(ADAPTER), CAS3-2K79X(ADAPTER), CAS4-1L15Y(ADAPTER), CAS4-1N35H-BACKUP(ADAPTER), CAS4-1N35H-FORCE-UL(ADAPTER), CAS4-1N35H-R/W/UL(ADAPTER), CAS4-5M48H-BACKUP(ADAPTER), CAS4-5M48H-FORCE-UL(ADAPTER), CAS4-5M48H-R/W/UL(ADAPTER), options in <4-IMMOBILIZER>->
+Add 48-IMMO(ADAPTER) option in <4-IMMOBILIZER>->
+ Add NATS5-IMMO option in <4-IMMOBILIZER>->
+ Add BCM-1L15Y(ADAPTER), BCM-1N35H-BACKUP(ADAPTER), BCM-1N35H-FORCE-UL(ADAPTER), BCM-1N35H-R/W/UL(ADAPTER), BCM-2M25J-BACKUP(ADAPTER), BCM-2M25J-FORCE-UL(ADAPTER), BCM-2M25J-R/W/UL(ADAPTER), BCM-5M48H-BACKUP(ADAPTER), BCM-5M48H-FORCE-UL(ADAPTER), BCM-5M48H-R/W/UL(ADAPTER), options in <4-IMMOBILIZER>->
+ Add CEM V50(2008)(MC9S12XDT512), CEM(R5F64524)((ADAPTER), CEM(R5F64525)(ADAPTER),
CEM1(R5F64524)((ADAPTER), CEM1(R5F64525)(ADAPTER), KVM(ADAPTER), options in <4-IMMOBILIZER>->
+ Add LACROSSE(2009-2013) option in <5-DASHBOARD>->
+ Add EADO-DT(2018) option in <5-DASHBOARD>->
+Add FIT_H(MB91F061BS)(ADAPTER), FIT_L(MB91F061BS)(ADAPTER) options in <5-DASHBOARD>->
+Add SONATA(MB91F062BS)(ADAPTER) option in <5-DASHBOARD>->
+Add K3(MB91F067BS)(ADAPTER), K5(MB91F061BS)(ADAPTER) options in <5-DASHBOARD>->
+ Add 523-AIRBAG option in <7-AIRBAG>->
+ Add SONG-MAX option in <7-AIRBAG>->
+ Add 3658110XPW01A option in <7-AIRBAG>->
+ Add FRM-E-SERIES(ADAPTER), FRM-E-SERIES_REPAIR(ADAPTER) options in <8-OTHER>->
+ Add MaLiba XL EPS(2020)) option in <8-OHTER>->
+ Add RFA_SEC(9S12XEQ384)(ADAPTER), RFA_SEC(9S12XET256)(ADAPTER) options in <8-OTHER>->

Xhorse VVDI Prog V5.0.8 (2021-10-27)
* This version DON't need update
firmware
* Fix LACROSSE-BCM(2008) diagram in
<4-IMMOBILIZER>->
+ Add MB91F109,
MB91F127,
MB91F128,
MB91F133,
MB91F155,
MB91F158,
MB91F223,
MB91F248,
MB91F267,
MB91F273,
MB91F313,
MB91F314,
MB91F318R,
MB91F345,
MB91F353A,
MB91F355A,
MB91F356B,
MB91F463C,
MB91F465C,
MB91F467C,
MB91F464H,
MB91F467M,
MB91F467T,
MB91F475,
MB91F478,
MB91F479,
MB91F482,
MB91F486,
MB91F487,
MB91F492,
MB91F575/S,
MB91F577/S,
MB91F610:FONT,
MB91F610:PROG,
MB91F627,
MB91F662,
MB91F668/F669
options in
<2-MCU>->
+ Add SAIC-GM-BCM
option in <4-IMMOBILIZER>->

+ Add CS75(MB91F534B)(2017)
option in <5-DASHBOARD>->
+ Add Viaggio(D70F3525)(2014)
option in <5-DASHBOARD>->
+ Add HIACE-DASHBOARD(2016)
option in <5-DASHBOARD>->
+ Add SOUTHEAST-V3-LINGYUE
option in <5-DASHBOARD>->

+ Add A4L-LEW-MODULE(2017-),
A4L-SKYLIGHT-MOTOR-MODULE,
options in <8-OHTER>->
+ Add VIANO-ELECTRIC-DOOR-MODULE
option in <8-OTHER>->
+ Add 525-REAR-VIEW-CAMERA-MODULE,
X5-E70-ESP(ST10F269),
X6-E71-TAILGATE-MODULE
options in <8-OHTER>->
+ Add CS75-AIRCONDITION-MODULE(2014)
option in <8-OHTER>->
+ Add ECOBOOST-AFS-MODULE
option in <8-OHTER>->
+ Add MG-6-TELEMATICS-MODULE(2014)
option in <8-OHTER>->
+ Add PHIDEON-TPM(2018)
option in <8-OHTER>->
+ Add S80L-ICM(2011)
option in <8-OHTER>->

How To Update VVDI Prog Programmer Online?

VVDI Prog Programmer Unit Description:

1.16 Pin DIP socket Function:
Read EEPROM chips Use method: Follow the image direction when insert the DIP chip (PIN1 as yellow point show as the picture);
SOP chip need soldering on 16Pin adaptor first, then insert the chip follow the image direction


2. MCU Reflash Cable
Function: Read & Write MC68HC(9)12, V850, H8X, R5C series chips,current version is V2
Use method: Soldering the line on pin of chip before read & write
Notes:
(1) Please check all connection lines,ensure correct and reliable connection
(2) Please Don’t lengthen CLK and GND-C line, maybe cause read data failed.



3. ECU Reflash Cable
Function: Read & Write engine ECU
Use method: Connect the ECU and R&W
Notes: Please check all connection lines, ensure correct and reliable connection



4.MC9S12 Reflash Cable
Function: Read & Write MC9S08, MC9S12 series chips, current version is V1
Use method: Soldering the line on pin of chip before read & write
Notes:
(1) Please check all connection lines,ensure correct and reliable connection.
(2) Please Don’t lengthen CLK and GND-C line, maybe cause read data failed.

VVDI Prog Programmer Feedback:

did a few tests today and this is what I found out.
It seems that VVDI prog reading speed is dependent on the processor speed of the computer.
CAS3 0L15Y flash read times
Centrino processor @ 1.6ghz Windows XP = 12mins
Core2 Duo processort @ 2.5ghz Windows 7 32 bit = 5 mins
i7 @ 4.4ghz Windows 7 64 bit = 2mins 30 seconds.
Other programmers do not seem to be affected by processor speed at all.
I also would of thought this was a fairly easy question to answer without me doing all the testing
Tested by me: cas 2, cas 3, cas 3+, Cas4 5m48h, volvo cem v40 all ok.
Is a very good tool and for bmw cas4 .
I tested today D80 and a m35080v6, and they work perfect.
Mine erased D160 (BMW F01 dash) with no problem.
Tried to renew bmw e series 868 key. Vvdi programmer claimed operation success but in tango key is now recognized as transponder type A. locked
I did renew 2 keys! Both worked and now are programmed to cars!
Only thing you need to disconnect from PCB is battery while writing the renew file. (Remove the batteries)
Renew BMW series E 868 key – 100% OK z vvdi-prog v4.5.7
FRM3 works perfectly
More EDC17 under ECU section would be great!
Especially BMW EDC16 and EDC17 for ISN purposes.
BMW F series FEM module reading but for that i can only dream about…
BMW BMSX bike ECU would be great…
Renew pcf7946 and 29f family
Renew E series remote with pcf7942 / pcf7944 would be fine
Unlock and download the 9S12G128 secure without erasing it first would be nice .
erasing all 35080s and d80 with soic clip would be super nice too!
I read the CAS3+ MCU with VVDI Prog and that worked perfect.
BMW FRM3 series Exx – READ and WRITE – OK
BMW KEY series Exx – OK
BMW DashBoard 6WB 160DQWT – READ , ERASE , WRITE – OK

VVDI Prog Reviews:

2004 Suzuki Jimny:
The first job i did with this kit was actually a 2004 Suzuki Jimny, literally within around 30 – 45 minutes of the parcel being delivered. The software was quick and easy to install (No cd provided, need to download from dealer website and update to latest version).

Anyway, for the Suzuki i used the VVDI-prog with the EEPROM clip adapter to read the immobox 24c01 in-circuit. Then using the VVDI2 immobiliser data tool, i was able to create a dealer key with an Xhorse 4d/4c chip. Write the new dump back to the immobox with VVDI-prog, put it all back together and worked first time thankfully after previous failed attempts with other devices.
Anyway end goal complete and happy with the new purchase

BMW EWS3:
I did some testing on the bench with a BMW EWS3 using VVDI2 with the CAS adapter cable (Needs external 12Vdc supply). It reads the EWS ok, but can’t write a file back to EWS.
I will try reading the EWS3+ that is in my car and produce a dealer key for it.

The file change km’ seems to read from dump ok, and will allow you to modify file with new km (untested on car though). If i get some time later on will try read/write with VVDIprog.

VVDI Prog FAQs:


VVDI Prog Programmer Package List: