cgdi prog
Ford Clamp for FO21 and Jaguar Tibbe Key Work with 2M2 TANK Key Cutting Machine
Ford Clamp for FO21 and Jaguar Tibbe Key Work with 2M2 TANK Key Cutting Machine is a one of our cgdi prog Tools, you can buy Ford Clamp for FO21 and Jaguar Tibbe Key Work with 2M2 TANK Key Cutting Machine from svcidiag.com.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150
images of Ford Clamp for FO21 and Jaguar Tibbe Key Work with 2M2 TANK Key Cutting Machine
Highlights:
Global patent technology
Rotate automatically while 12 & 16 sides cut for Fo21 & Tibbe Rotated Key
Set Built-in-stacode
Standard Clamp for Laser Key, Standard Key, Cruciform Key, Dimple Key, Sided Key, Tracked Key (Extra more Hu162-T,Toy2,Hu66)
Key Blank Installation:
1. Loosen the screw.
2. Remove the standard fixture.
3. Remove the probe.
4. Install the FO21/TEB1 fixture.
5. Tighten the screw.
6. Insert New key blank.
7. Align the red line of the axis to the red line on the right.
8. Turn the key blank off the horizontal position.
9. Tighten the nut by hand at first.
10. Use the fixed block to locate the key blank.
11. Pull the key blank towards the arrow.
12. Rotate the nut and tighten it.
13. Use the red spanner to fix the axis;use the blue spanner to tighten the nut.
14. Move the fixed block away.
Key blank installation is finished, the last step is to connect the power line and click confirm.
Package includes:
1pc x TANK 2-in-1 Automatic Key Cutting Machine Automatic Rotating Clamp
Go to Buy: Ford Clamp for FO21 and Jaguar Tibbe Key Work with 2M2 TANK Key Cutting Machine