Orange 5 Super Pro Programmer is a professional programming device for memory and microcontrollers. Unique feature of the current series programmers is built-in macro language for writing down protocols, which gives fast and easy capability to add new types of micro schemes, precisely meeting manufacturers' requirements to read/write algorithms.
Orange5 Super Pro V1.35 Programming Tool With Full Adapter USB Dongle for Airbag Dash Modules Fully Activated is a one of our Orange5 Super Pro Tools, you can buy Orange5 Super Pro V1.35 Programming Tool With Full Adapter USB Dongle for Airbag Dash Modules Fully Activated from svcidiag.com.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150
Software Licenses:
MTRK (Included in Orange-5 base)
TMS (Included in Orange-5 base)
M08V NEW
Immo HPX 9V0
NEC V850ES/SJ3 V850ES/SG3 UART
NEC V850E2 NEW
New license:
MCU ( Infineon,ST and MicroChip)The differences between orange 5 super pro and orange 5 plus:
More chip models than others in Infineon, ST, and MicroChip of MCU, as shown in the figure:Orange5 Technical Info:
* USB power supply (USB2.0/3.0)
* Universal easy to plug panel ZIF16 for EEPROM
* Control of contacts in the sockets
* Two expansions compatible with Orange4 and Omega MTRK
* Protection against overcurrent
* Overload voltage protection
* Two types of power supply: Standart (USB) and enhanced (USB + external power supply)
* Three 3 adjustable voltage and current control: Voltage of power supply ( 2.0...5.0V ), programming voltage (2.0...21.0V), additional static 10V for microcontrollers
* High-speed bidirectional pin drivers with adjustable voltage (2.0...5.0V)
* Wave cycle generator with frequency ( up to 24 Mhz) and out voltage(2.0...5.0V) adjustment
* Capability of functional emulation of class CDC USB devices
* Built-in 32-bit virtual machine
* Supported interface: I2C, SPI, MicroWire, JTAG, UART, BDM, ISO7816, K-LINE (via adapter), CAN (via adapter)
* Programmer is encolsed in a functional box. Supported working under Windows XP/7 32bit. [*Win8.1]
- Installation and Work with Orange-5 under Windwos 7 and Windows 8.1
CnCterm - Terminal program for work with COM ports.
Feature:Supports any COM ports, including virtual ones from 1 to 20
Works with text (ASCII) and HEX mode
Creating a list of commands that allows editing and fast sending
Fine-tuning the exchange rate
Saving files including command and port settings.
Saving incoming data in binary files
File transfer via serial port.
Delay settings for bytes and blocks
"Echo" mode
Delay settings between incoming data
Management of DTR, RTS chains, visualizing DSR, CTS, CD, RI
The program doesn't need to be installed
Supports Orange5 programmer in emulation mode.
Orange5 Programmer Chip List:
Immo HPX 9V0
EEPROM:
MicroWire,4Wire,Adesto,AKM,Altera,Amic,Atmel,BOSCH,Catalyst,Chingis,Dallas/Maxim,EON,ESMT,EXEL,Fairchild,Fujitsu,GI,GigaDevice,Grundig,HOLTEK,Hynix,ITT,KHIC,Macronix,MicroChip,Micron,for Mitsubishi,for Motorola,NEC,NSC,Numonyx,OKI,PCT,Philips,Pioneer,PMC,Ramtron,Rohm,Samsung,Seiko,for Siemens,Sony,Spansion,SST,ST,Winbond,Xicor,XUSSR,YMC,MCU,Atmel,Infineon,MediaTek,MicroChip,Nordic,NSC,Philips,for Renesas,for Samsung,SiLabs,ST,TI,for Motorola, for Freescale,MC68HC11,MC68HC12
Packing List
1 x Orange 5 super pro Programmer
1 x TMS375C006/TMS370CX36/TMS370CX32/X42 A1
1 x HC05B/HC705B A2
1 x Adapter 11EA9/PLCC52 A5
1 x Adapter 908AS60 PLCC52 A6
1 x Adapter QFP112/9S12XE QFP80/9S12XE/9S12XS A7
1 x HC11A/EXX PLCC52 A8
1 x Adapter HC11F1 A9
1 x Adapter 908AS60/AZ60 QFP64 A10
1 x 705E6/705P3/05P3 A11
1 x Adapter 68HC11L6 A12
1 x Adapter TMS374C003A A13
1 x Adapter 05B/X_705B/X QFP64 V2 A14
1 x Adapter QFP112/9S12 QFP80/9S12DXX A15
1 x Adapter QFP64 A16
1 x Adapter 68HC05H12 A17
1 x Adapter QFP64/QFP80 A18
1 x Adapter PCF7941 A19
1 x Adapter 912B32 QFP80 A20
1 x Adapter 912Dxx A21
1 x Adapter 9S12HZ/QFP80 1 9S12XHZ /QFP112 A22
1 x Adapter 93CXX-14
1 x USB cable