V2021.09 Software HDD MB SD Connect Compact 4 Star Diagnosis Supports Vediamo and DTS Monaco
Support reading out & erasing trouble code,reading the real-time data of sensor and actuator, coding and programming. Support wireless diagnose, support K line,CAN BUS and UDS protocol.With V2021.9 500GB Software Hard Disk, support Videomo,DTC and Monaco
UKOBD2 Provide top quality V2021.09 Software HDD MB SD Connect Compact 4 Star Diagnosis Supports Vediamo and DTS Monaco, if you need V2021.09 Software HDD MB SD Connect Compact 4 Star Diagnosis Supports Vediamo and DTS Monaco, or have any questions about V2021.09 Software HDD MB SD Connect Compact 4 Star Diagnosis Supports Vediamo and DTS Monaco, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of V2021.09 Software HDD MB SD Connect Compact 4 Star Diagnosis Supports Vediamo and DTS Monaco
MB 100(631), T1, SprinterIII, SprinterII, SprinterI, Sprinter900, Citan, Vito(639), Vito(638), V(638), Viano(639), T2, Vario, Vaneo(414)
Actros963/4, Actros2,3, AtegoIII, AtegoII, AxorII, Eonic, Zetros, Actros, Atego Light, Atego Heavey, HPN M96, Atron, HPN M2000, SKL, FSK, Further model series
U20, UGN, UHN
TRAVEGO, INTOURO, INTEGRO, CITARO, CAPACITY, CITO, TOURISMO, O350/ O403, CONECTO, O404, O405- O408, Minibus, OC500, TOURO, TOURINO, MBC, MULITEGO, O500, O500/ OH, OH, OH368, OF, OF384, LO, O400, FURTHER MODEL SERIES
SLR(199)
2. Connect the sdconnect 4 with the car and start the car
3. Connect to the wireless connections, please follow the next instructions to set: click Configuration-MUX-Register/configure, under the "General information", select name "04" and then tick off "Wlan parameters, road", then set the following parameters: IP address: 192.168.2.200, Network screen: 255.255.255.0, Encryption: WEP / Hex, Key: aaaaaaaaaaaaaaaaaaaaaaaaaa (26 a in total), we have video tutorial, please click column "Video" to watch or contact our customer service to send you.
What should you pay attention when you use SD Connect 4:
1) From software 2015.3 on, DAS icon will not shown on the desktop, DO NOT ADD this DAS icon by yourself when you use the software. Otherwise it will cause some error even destroy the software by doing this. We will charge fee if software is destroyed by this way.
2) If you need to use DAS to diagnose your car. Just enter Xentry. If your car need to be done by DAS, then software will switch to DAS interface automatically
3) Battery: When you first time to use this SD C4, you need to use the 100% brand new battery on the main unit, not rechargable battery! After done, then no need battery for main unit anymore if you use this software all the time. Because this battery is for update. If you use newer software in the future, then when you first time use the newer software, you need to use new battery for update again.
4) For USA configuration DOIT system after 2014. ALL star C3, C4, SD C4 does not support. For DOIT system after 2014, need to use XENTRY C5 to work.
PCB Display:
Package list:
1pc x New MB SD C4 Multiplexer
1pc x OBDII 16PIN Cable
1pc x 38PIN Cable
1pc x 14PIN Cable
1pc x 4PIN Cable
1pc x Lan Cable
1pc x Software HDD
Go to Buy: V2021.09 Software HDD MB SD Connect Compact 4 Star Diagnosis Supports Vediamo and DTS Monaco