Hantek 1008B 8 Channel PC Oscilloscope/DAQ/8CH Generator
Cost-effective 8 channels oscilloscope for vehicle testing; 2.4MSa/s, 12bits; DAQ card function; 8 channels programmable generator which can analog signals of crankshaft, camshaft etc.
UKOBD2 Provide top quality Hantek 1008B 8 Channel PC Oscilloscope/DAQ/8CH Generator, if you need Hantek 1008B 8 Channel PC Oscilloscope/DAQ/8CH Generator, or have any questions about Hantek 1008B 8 Channel PC Oscilloscope/DAQ/8CH Generator, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of Hantek 1008B 8 Channel PC Oscilloscope/DAQ/8CH Generator
Hantek 1008B 8CH PC Oscilloscope/DAQ/8CH Generator
Top 3 Reasons to Get 1008B 8CH PC Oscilloscope/DAQ/8CH Generator:
2. 2.4MSa/s real time sampling rate, 12bit vertical resolution; DAQ card function
3. 8 channels programmable generator which can analog signals of crankshaft, camshaft etc.
1) Oscilloscope
8 channels oscilloscope, 2.4MSa/s real time sampling rate
12 bits vertical resolution, spectrum analysis function
2) Programmable Generator
8 channels programmable generator
Can analog signals of crankshaft, camshaft etc.
3) Others
USB 2.0 interface plug and play, and no need extra power supply;
More than 20 types of automatic testing function, a similar interface with benchtop oscilloscope, easy to use;
Software support: Windows NT, Window 2000, Windows XP, VISTA, Windows 7, Windows 8.
Hantek 1008B Oscilloscope Functions List:
Set Oscilloscope
Set Vertical System
Set Horizontal System
Set Trigger System
Save/Load
Utility Function
Measure Signal
Display System
Waveform Generator
Zoom In/Out Waveforms
Acquisition
Generate Square Waveform
Hantek 1008B Oscilloscope Software Display:
Hantek 1008A Oscilloscope Reviews:
Review 1:Software can be a bit flakey, but support is excellent as responding to problems. The sample rate is quite low, but it is well within the specs of the device. I just wish it were higher. Not a bad entry level basic scope.
Review 2:This devices is just what the doctor ordered! I know it's 'meant' for auto type diagnostic work but for me using just two channels for audio stuff the 12 bit resolution at the frequencies I care about is just right from my needs.
Review 3:I really couldn't tell because the item was purchased for someone else, but I'm sure it meets all expectations
Hantek 1008B 8CH PC Oscilloscope/DAQ/8CH Generator Parameters:
| Model | Hantek 1008B | |
| Oscilloscope Mode | ||
| Vertical System | ||
| Analog Channel | 8 | |
| Input Impedance | Resistance: 1MΩ | |
| Input Sensitivity | 10mV/div to 5V/div | |
| Input Coupling | DC | |
| Resolution | 12 bits | |
| Horizontal System | ||
| Memory Depth | 4K | |
| Max. Input | 400V (DC+AC Peak) | |
| Real-Time Sampling Rate | 2.4MSa/s | |
| Time BaseRange |
| |
| Time Base Precision | ±50ppm | |
| Trigger System | ||
| Time Base Range | 1ns/div to 20000s/div(1-2-5sequences) | |
| Time Base Precision | ±50ppm | |
| Trigger Source | CH1, CH2,CH3,CH4, CH5, CH6,CH7,CH8 | |
| Trigger Mode | Edge | |
| X-Y Mode | ||
| X-Axis Input | CH1 | |
| Y-Axis Input | CH2 | |
| Cursors and Measurement | ||
| Voltage Measurement | Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot | |
| Time Measurement | Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle | |
| Cursors Measurement | Horizontal ,Vertical, Track, Auto Measure Modes | |
| Waveform Signal Process | +,- , x,÷, FFT, Invert | |
| Voltage Range | 10mV to 5V/div @ x 1 probe 100mV to 50V/div @ x 10 probe 10V to 5000V/div @ x 1000 probe 100V to 50000V/div @ x 10000 probe 200mV to 100V/div @ 20:1 | |
| Current Range | 100mA to50.0A/div @ CC65(20A) 1000mA to500.0A/div @ CC65(65A) 1A to100.0A/div @ CC650(60A) 1A to200.0A/div @CC1100(100A) 10A to2000.0A/div @CC1100(1100A) | |
| FFT | Rectangular, Hanning, Hamming, Blackman Window | |
| Math | Addition, subtraction, multiplication, division | |
| Programmable Generator | ||
| Channel | 8 | |
| Output Level | LVTTL | |
| Frequency Range | 0-250kHz | |
| Interface | USB 2.0(Full Speed) | |
| Power | No need extra power supply | |
| Size & Weight | 185 x 150 x 27 (mm); 0.35kg | |
Hantek 1008B Package including:
1pc x 8CH USB Auto Scope/DAQ/8CH Generator
1pc x USB Cable
4pc x Connect cable
4pc x BNC Connector
1pc x CD for English software
Go to Buy: Hantek 1008B 8 Channel PC Oscilloscope/DAQ/8CH Generator