US$ 590 2023 FoxFlash Super Strong ECU TCU Clone and Chip Tuning Tool Free Update Online

2023 FoxFlash Super Strong ECU TCU Clone and Chip Tuning Tool Free Update Online Support VR Reading and Auto Checksum

Master version, full protocols, VR reading onlineFree update. No subscription, no annual fee.Auto checksum, two Years Warranty.Winols damos and A2L supply for free.2022 New FoxFlash Super Strong ECU TCU

UKOBD2 Provide top quality 2023 FoxFlash Super Strong ECU TCU Clone and Chip Tuning Tool Free Update Online Support VR Reading and Auto Checksum, if you need 2023 FoxFlash Super Strong ECU TCU Clone and Chip Tuning Tool Free Update Online Support VR Reading and Auto Checksum, or have any questions about 2023 FoxFlash Super Strong ECU TCU Clone and Chip Tuning Tool Free Update Online Support VR Reading and Auto Checksum, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of 2023 FoxFlash Super Strong ECU TCU Clone and Chip Tuning Tool Free Update Online Support VR Reading and Auto Checksum

FoxFlash Super Strong ECU TCU Clone and Chip Tuning Tool Free Update Support VR Reading and Auto Checksum

FoxFlash is a powerful solution developed for professional chiptuners, calibration engineers and control unit (ECU and TCU) repair shops. foxFlash includes multi-method control unit programming for tuning ability,this tool from tuner design ,so you can get many of them support. Since the FoxFlash is so much more than just an ECU programming tool, it simply can't be compared to any traditional flash tool. Despite other tools how good, this is being good tools for read/write operations, we supply many important features, both on the developer side as in daily use. That is why we recommend FoxFlash.

FoxFlash Highlights:

1. Master Version, Full protocols open

2. VR read online work (some ecu need use our VR system, tool auto connect to ousr server donload file)

3. ECU can be restore to original if your ecu was damage or meet some bad tuning , use our tool can restore to original

4. Free Update Online, No Subscription, No Annual Fee, Two Years Warranty. Latest Update Detail Check Here.

5. Tool can online work (some of ecu and functions can offline)

6. Auto checksum

7. Excellent Online Technical Support

8. Help desk and tuner account

9. ECU and TCU connect wires with pdf
10. Support MEDC17 free clone service (most of others tool need patch the files after read out ,but ours is free)
11. Software can be download on official website: https://www.dfb-technology.com/
12. With the Latest firmware and updates. Use better quality BOM and PCB. More stable, full proof, and reliable.
13. FoxFlash ECU TCU Car List, or check driver list on dfb-technology, it is much easier to search than pdf
14. Language: Italian, English, Dutch, French, Spanish, Polish, Portuguese, Romanian, Czech, Turkish
15. Please Check the FoxFlash Installation Instruction

FoxFlash Operation Modes:

1. OBD mode: (read the data from Diagnostic port ,you need remove the ecu or tcu from car or open the ecu box , just read everything from car, we also support obd vr read, we supply original file from our server, you can direct obd vr read it )

2. BENCH mode: we also call it service mode, you can use this mode clone or backup all ecu data, read the internal flash and external flash and eeprom data, so you can save a lot of money for clone ecu and tcu , you also can clone tcu and chiptuning with this mode.

3. Jtag mode: open the ecu , and wire it or use ours adapter connect ecu ways,some of denso ecu always need use this mode for read and write .

4. Boot mode: open the ecu and always can backup everything , read the flash and eeprom , you can save some ecu cause your obd write failed, or some others reason cause the ecu dead.

5. Full system : you can read and write by pinout for most of ecu and tcu

6. BDM mode: some of the ecu need read and write in bdm mode ,open the ecu and use ours adapter connect it

FoxFlash Support types:

CAR
TRUCK
MOTORBIKE
TRACTOR
BOAT
Additional TCU package available for Automatic Transmissions.

FoxFlash Compatible Operating Systems:

Windows 7
Windows 8/8.1
Windows 10
Windows 11

Recommended minimum requirements:
CPU > 2.5 GHz (Intel i5, i7)
RAM > 4GB
64 bits

FoxFlash Software Display:

FoxFlash Function List:

ECU clone

TCU clone

Chiptuning

Stage1-stage4

Vmax off

Adblue and SCR off

DPF OFF

Flaps OFF

popbangs

gearbox data to adjust LC

sport display

immo off

dpf off

dtc off

GPF/OPF Removal

DPF Removal

EGR Removal

DTC Removal

ADBlue Removal

HOT Start Fix

IMMO Removal

Readiness Calibration

Flaps / Swirl Removal

TVA Removal

Sport Displays Calibration

Cold Start Noise Reduction

Kickdown Deactivation

StartStop Disable

MAF Removal

Speed Limiter Removal

Torque Monitoring Disable

Burbles Activation

Popcorn Activation

EVAP Removal

Exhaust Flap Removal

SAP Removal

AGS Removal

BMS/BPCM

Lambda/O2 Removal

Launch Control

OBD Reading Protection

Boost Sensor Calibration

LC, AL and NLS for MED9.1

Checksum Fix

vmax, swirl off

restoring ECU or TCU factory setting service

VIN fix (EEPROM support checksum , so you can easy change VIN then write back )

Support Winols damaos

As we all know, winols damaos and A2L is very expensive ,we supply these to ours customer for free, so you can get it for chitpuning, dtc off, and so on.

Supported Control Units
We believe a control units list can be considered as a more safe approach to correctly target the overall tuning procedure due to the fact that a lot of brands offer identical car models & versions that share different Control Unit types.

Please note that foxFlash can help you select the right protocol with its auto-detection feature when identifying on most control units.

Support Vehicle Types:

AUTO
CAMION
TRATTORI
MOTO
MARINE
BIKE
CAMBI AUTOMATICI

Multiple connection possibilities:
EXAMPLES OF CONNECTION IN FULL SYSTEM BOSCH / DELCO / DELPHI / DENSO / MARELLI / SIEMENS / CONTINENTAL / TEMIC

BENCH CONNECTION

BDM CONNECTION

JTAG CONNECTION

BOOT MODE CONNECTION

FoxFlash Update Information:

January 27, 2023

FoxFlash is now able to perform the Toyota Denso Gen1 (76F00xx) OBD read/write
FoxFlash is now able to perform the following operations:

OBD Read
OBD Write

On the following ECU reference:
Denso Gen1 (76F00xx)

ECU UPDATE New Protocols for Bentley Skoda (BOSCH )

Today we added multiple protocols for Bentley, Skoda, Honda, Volvo, etc. More info on supported ECUs and cars can be found below.
SUPPORTED CONTROL UNITS & VEHICLES
BENCH /BOOT/OBD
BOSCH
BAIC Bosch ME17.8.8 TC1728: Senova x25 1.5 VTI (2016), Senova X35 1.5 VTI (2016) , BJ20 1.5 VTI (2016)(BOOT)
Honda Bosch ME17.9.55 TC1724: City/Jazz/BRIO/FIT 1.2L i-VTEC (2014)(BOOT)
Mahindra Bosch EDC17C53 TC1767: XUV500 2.2 CRD (2014)(BENCH BOOT)
Bentley Bosch MG1CS163 TC298: Continental GT W12 6.0 (2018)(BENCH)
Volvo Bosch EDC16C34 MPC562: V70/S80 1.6D (2010)(OBD BENCH JTAG)
Skoda Bosch MED17.1.27: Fabia 1.0 TSI (2017)(OBD BENCH BOOT)
Bentley Bosch MED17.1.62: Bentayga W12 6.0 (2016)(BENCH BOOT)

BMW MSV90 Protocols BOOT Mode

This time it is for BMW cars with Siemens MSV90 TC1796 ECU. More info on supported cars can be found below.
SUPPORTED CONTROL UNITS & VEHICLES
BOOT
SIEMENS
MSV90 TC1796
CARS:
BMW 5 Series F10 – 530i N53B30A/N52B30B
BMW 5 Series F11 – 530i N53B30A/N52B30B
BMW 7 Series F01 – 730Li N52B30A/N52B30B
BMW 7 Series F02 – 730Li N52B30A/N52B30B
BMW X3 Series F25 – 28i xDrive N52B30A/N52B30B

Delphi DCM6.2AP DCM6.2A DCM6.2C DCM6.2V

FoxFlash is now able to perform the following operations:

DCM6.2A/C/V
OBD Read
OBD Write
JTAG_BOOT

DCM6.2APJTAG_BOOTOn the following ECU reference:

Hyundai
Audi
Citroen
Fiat
Kia
MAN
Peugeot
VW
Toyota
Ssangyong

January 26, 2023

FoxFlash Can Support AUDI VW Group TCU DQ250C/E/F OBD virtual read/write-BENCH Read&Write
FoxFlash is now able to perform the following operations:
OBD Virtual Read
OBD Write
BENCH Read
BENCH Write
On the following TCUs:
Temic DQ250C
Temic DQ250E
Temic DQ250F
Vehicles concerned:
AUDI/SKODA/VAG 2.0 TSI/TFSI
AUDI/SKODA/VAG 2.0 TDI CR

January 20, 2023

– BENCH MODE BY PROCESSOR INFINEON TRICORE TC1782
With this update you will be able to fully read and write the following ECUs directly
From pinout without having to open them:
– VAG GROUP VW-AUDI-SEAT-SKODA: MED17.5.21, MED17.5.25
– FORD: MED17.0.7
– NISSAN: EDC17 C84
– RENAULT: ME17.9.20, EDC17 C84
– TOYOTA: MED17.9.52, EDC17 C47

January 16, 2023

EXTRACT PASSWORD FROM FILE

– NEW DRIVERS TO EXTRACT PASSWORDS FROM FILES

New utilities useful for extracting the password by loading a Tricore processor file.
As of now, the software will also save the tricore password locally for each Tricore processor reading.

FULL SYSTEM FOR TCU TEMIC 6T50 OPEL, CHEVROLET

– Complete reading and writing of Micro,
– Complete reading and writing of EEPROM,
– Cloning
– RIVERGIN function

FoxFlash Package Includes:

Hardware:

1pc x Master machine
1pc x Fox bench box
1pc x USB cable
1pc x Power adapter
1pc x Fox box store over 10 adpaters
1pc x Jtag and bdm cables
1pc x Pen
1pc x Notebook
1pc x Suitcase
1pc x Function cable for boot, bench, kline links .
1pc x Truck OBD cable
1pc x Car OBD cable
1pc x Paper box
1pc x Install guide

Software:

1pc x Main software
1pc x Technical Support
1pc x Login account for software and tools
1pc x PDF pacakges for connecting ecu and tcu
1pc x Join facebook group for support
1pc x Online chat support for use

Extra pacakge according to users request after the user get the tool.

1pc x Tuner account
1pc x Helpdesk
1pc x WinOLS damaos, A2L

Go to Buy: 2023 FoxFlash Super Strong ECU TCU Clone and Chip Tuning Tool Free Update Online Support VR Reading and Auto Checksum

Tags: foxflash, FoxFlash ECU Programmer , FoxFlash ECU

Prev: XTOOL A30M OBD2 Full System Diagnostic Tool Bi-directional Control Scanner For Andriod/IOS Car Code Reader

Next: Super MB Pro N3 for BMW Diagnostic and Programming Tool Full Configuration Compatible with All BWM Inspection Software