Ford Clamp for FO21 and Jaguar Tibbe Key Work with 2M2 TANK Key Cutting Machine

Ford Clamp for FO21 and Jaguar Tibbe Key Work with 2M2 TANK Key Cutting Machine

UKOBD2 Provide top quality Ford Clamp for FO21 and Jaguar Tibbe Key Work with 2M2 TANK Key Cutting Machine, if you need Ford Clamp for FO21 and Jaguar Tibbe Key Work with 2M2 TANK Key Cutting Machine, or have any questions about Ford Clamp for FO21 and Jaguar Tibbe Key Work with 2M2 TANK Key Cutting Machine, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of Ford Clamp for FO21 and Jaguar Tibbe Key Work with 2M2 TANK Key Cutting Machine

Ford Clamp for FO21 and Jaguar Tibbe Key Work with 2M2 TANK Key Cutting Machine

Highlights:

Global patent technology
Rotate automatically while 12 & 16 sides cut for Fo21 & Tibbe Rotated Key
Set Built-in-stacode
Standard Clamp for Laser Key, Standard Key, Cruciform Key, Dimple Key, Sided Key, Tracked Key (Extra more Hu162-T,Toy2,Hu66)

Key Blank Installation:

1. Loosen the screw.
2. Remove the standard fixture.
3. Remove the probe.
4. Install the FO21/TEB1 fixture.
5. Tighten the screw.
6. Insert New key blank.
7. Align the red line of the axis to the red line on the right.
8. Turn the key blank off the horizontal position.
9. Tighten the nut by hand at first.
10. Use the fixed block to locate the key blank.
11. Pull the key blank towards the arrow.
12. Rotate the nut and tighten it.
13. Use the red spanner to fix the axis;use the blue spanner to tighten the nut.
14. Move the fixed block away.
Key blank installation is finished, the last step is to connect the power line and click confirm.






Package includes:

1pc x TANK 2-in-1 Automatic Key Cutting Machine Automatic Rotating Clamp

Go to Buy: Ford Clamp for FO21 and Jaguar Tibbe Key Work with 2M2 TANK Key Cutting Machine